I got a new laptop recently so I’ve been trying to clean install my old one to give to someone else since it’s still in pretty good working order. I decided to install Windows 10 off the site I think? I didn’t use any installation media, I remember that much.

This was a couple days ago now. In any case, since then I figure it finished or so but it’s been stuck on Just a moment Sometimes I leave it on to see if it will finish but it never does, it’s been a few days now. I’ve tried to get to other screens, but the only other thing it lets me pick is boot device, and the only option there is the Boot Manager.

I have a windows 10 usb and dvd now, but neither of them show up in boot devices, so I can’t try to reinstall. Am I stuck waiting for an eternity or can I fix this? I also tried activating airplane mode, taking out the battery, and some stuff I can’t remember. The touchpad works which is funny because it never works when windows is actually running so I can see the cursor, but that’s the only response I get from it.

If the laptop is stuck on the ‘ Just a Moment’ screen, unplug any USB devices, especially a wireless mouse or keyboard. Then Start the laptop again, it will now hopefully finish the install. If that does not work, you say you have a Windows 10 installation USB, is this bootable media. Your laptop should then boot from the Flash Drive and install a clean copy of Windows To get into your BIOS look at the screen immediately as your laptop starts, there will be text like ‘ press F2 to enter setup’, the key might also be Esc or Del.

NOTE: During the Windows installation, your laptop will reboot, at this point you must go into your BIOS and change the boot order back, so your hard drive is top of the list, otherwise the installation will start over. Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. Hard restarts haven’t worked, I’ve taken out the battery and took the plug out after I had turned it off and pressed the power button a few times just to make sure it was reset, turned it back on, I’ve done this before too and it still gets infinitely stuck on that screen.

There are currently no usb devices plugged into it, I just have my windows 10 dvd in the tray. I finally got to the bios screen, I’ve set the boot order to check for dvds and usbs first, but now when I restart it just goes back to the bios screen no matter what I press.

Currently I don’t have the hard drive as an option, so that’s probably why. But does that mean it won’t detect anything aside from the hard drive now? Will also test with usb drive and with re-enabling the hard drive as a boot option and will say what happens. Turn your computer on and off three times.

While booting, make sure you turn off the computer when you see the Windows logo. After the third time, Windows 10 will boot into diagnostics mode. Click Advanced options when the recovery screen appears. You can try booting into the Recovery environment again, then click Advanced options, then click Startup repair.

It’s worked before so I know I did it right, heh. Same thing with the USB, used the tool to create it. Currently I don’t see the windows logo when it starts up. I see the MSI logo, then the screen turns black for a moment, then it switches to the Just a moment Also I was out for a bit and when I came back it had gone to sleep and when I woke it up, the Just a moment Yes, when you see that MSI logo, you should power it on and off three times.

Systems that come preloaded with Windows 10 will use the manufacturers logo instead of the Windows logo. Power down your computer, start it the immediately start striking the F3 key repeatedly. This will take you to the recovery environment. I’ve tried the F3 thing a couple times. It either goes to the Just a moment When it bluescreens, it starts off with a Please Wait, then I get this error code:.

Choose where you want to search below Search Search the Community. Search the community and support articles Windows Windows 10 Search Community member. Rylarra Moonfire.

I’ve looked up a couple answers but so far nothing I’ve found works, so here’s the issue. This thread is locked. You can follow the question or vote as helpful, but you cannot reply to this thread. I have the same question Report abuse. Details required :. Cancel Submit. Previous Next. DaveM Independent Advisor. To get into your BIOS look at the screen immediately as your laptop starts, there will be text like ‘ press F2 to enter setup’, the key might also be Esc or Del NOTE: During the Windows installation, your laptop will reboot, at this point you must go into your BIOS and change the boot order back, so your hard drive is top of the list, otherwise the installation will start over.

I Hope this Helps! How satisfied are you with this reply? Thanks for your feedback, it helps us improve the site. In reply to DaveM’s post on December 2, In reply to Rylarra Moonfire’s post on December 2, Andre Da Costa Article Author. Click Troubleshoot. Click the option Reset this PC then follow the on screen instructions Let us know if this helps. In reply to Andre Da Costa’s post on December 2, I tried what you mentioned during the MSI logo screen but that didn’t do anything. It’s much older than that, it had windows 10 on it but it’s definitely too old for that to be preloaded.

By that I mean it was upgraded to 10 but had something on it before, I think it came with 8. In any case the on and off three times didn’t do anything anyways. In reply to Rylarra Moonfire’s post on December 3, It also applies to systems with Windows 8.

Try booting into the Recovery environment. Follow the on screen instructions to perform a factory recovery. In reply to Andre Da Costa’s post on December 3, Sorry this took so long, I havent been able to work on the laptop in a few days.

When it bluescreens, it starts off with a Please Wait, then I get this error code: 0xca Then it reboots and goes back to just a moment This site in other languages x.

Aug 25,  · Step 1: Run Windows Update Troubleshooter The first step is the safest way to resolve Windows 10 Update issues. The process will automatically scan for Estimated Reading Time: 8 mins. May 06,  · Hold down the Windows Logo key, and while doing so, press R to open a Run Type replace.me into the Run dialog and press Enter. Locate and right-click on the Windows Update service, and click on Properties. Set the service’s Startup type to Automatic, if the service is stopped, click on Start to start it, click on Apply and then click on OK. Apr 30,  · Windows 10 stuck on black screen with spinning dots may occur in different situations. Three common scenarios are here: 1. Windows Update Stuck on Loading Screen. Some users say that they want to upgrade their Windows OS to the latest Windows 10, but finally, Windows 10 stuck on black loading screen without any process issue happens. 2. Mar 25,  · After we have finished all commands, we can restart our computer and try to check whether Windows 10 won’t download updates issue is solved. Increase Free Space of System Drive Sometimes, the problem Windows 10 won’t install or download update may be caused by small capacity of the system drive.

If that does not work, you say you have a Windows 10 installation USB, is this bootable media. Your laptop should then boot from the Flash Drive and install a clean copy of Windows To get into your BIOS look at the screen immediately as your laptop starts, there will be text like ‘ press F2 to enter setup’, the key might also be Esc or Del.

NOTE: During the Windows installation, your laptop will reboot, at this point you must go into your BIOS and change the boot order back, so your hard drive is top of the list, otherwise the installation will start over.

Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. Hard restarts haven’t worked, I’ve taken out the battery and took the plug out after I had turned it off and pressed the power button a few times just to make sure it was reset, turned it back on, I’ve done this before too and it still gets infinitely stuck on that screen. There are currently no usb devices plugged into it, I just have my windows 10 dvd in the tray.

I finally got to the bios screen, I’ve set the boot order to check for dvds and usbs first, but now when I restart it just goes back to the bios screen no matter what I press. Currently I don’t have the hard drive as an option, so that’s probably why. But does that mean it won’t detect anything aside from the hard drive now? Will also test with usb drive and with re-enabling the hard drive as a boot option and will say what happens.

Turn your computer on and off three times. While booting, make sure you turn off the computer when you see the Windows logo. After the third time, Windows 10 will boot into diagnostics mode.

Click Advanced options when the recovery screen appears. You can try booting into the Recovery environment again, then click Advanced options, then click Startup repair. It’s worked before so I know I did it right, heh. Same thing with the USB, used the tool to create it. Currently I don’t see the windows logo when it starts up. I see the MSI logo, then the screen turns black for a moment, then it switches to the Just a moment Also I was out for a bit and when I came back it had gone to sleep and when I woke it up, the Just a moment Yes, when you see that MSI logo, you should power it on and off three times.

Systems that come preloaded with Windows 10 will use the manufacturers logo instead of the Windows logo. Here you need to disable all enabled applications one by one. After disabling all programs, close Task Manager and click OK. Afterward, you can restart the computer to update Windows again. I had to hard restart it.

Error Code 0x activation error. Problem disk C and the usb. Upgrade win 10 entreprise evaluation copy to fully copy.

I can’t update my PC to Update. Skip to main content. Find threads, tags, and users Why it’s stuck? Current Visibility: Visible to all users. If Windows Update freezes or gets stuck, there are several steps to try. The first step is the safest way to resolve Windows 10 Update issues. The process will automatically scan for and detect problems within your system, which can take a few minutes to complete.

Press Enter after you type each one. Select all files, then press Delete. Turn off the two Windows Update services and then try to delete the files again.

Once the folder has been emptied, either restart your computer or manually turn on the Windows Update services. To do this, bring up the command prompt admin and type:.

Once the updates have all been installed, Windows will schedule a restart time, although you can always restart immediately. The following fix is a convenient way to execute several commands in one swoop. It may or may not work for you. Use it at your own risk! Right-click the batch file and select Run as Administrator. Restart Windows after the script completes successfully.

The script above allows Windows to create fresh update folders and data within them to eliminate any file corruption or incompatibilities. If none of the above options fixed your Windows Update problem, it is time to decipher the codes to discover the cause of failure—hopefully! Most update issues return an error code that identifies what caused the update to fail.

The following table below provides the most common Windows 10 Update error codes and the possible solutions to fix them. This will revert your PC to an earlier point in time. Sometimes Windows 10 can run into problems when updating, luckily, you know what to do now if that happens. Start with the least complicated and permanent issue before resorting to previous restore points and more drastic solutions. Feel free to share it in the comments below. Your email address will not be published.

Save my name, email, and website in this browser for the next time I comment. Disclaimer: Some pages on this site may include an affiliate link. This does not effect our editorial in any way. Should I upgrade to Windows 10?

Disable the VPN if applicable and attempt to reinstall. Otherwise, try updating again when your internet connection is stable and reliable. Scenario 2: There is a lack of free space in the System Reserved partition.

И с ироничной усмешкой вспомнил: – Без воска». Беккер стоял с закрытыми глазами, а человек в очках в металлической оправе приближался к. Где-то неподалеку зазвонил колокол. Беккер молча ждал выстрела, который должен оборвать его жизнь.

Он снова с силой пнул ногой педаль стартера. Пуля пролетела мимо в тот миг, когда маленький мотоцикл ожил и рванулся. Беккер изо всех сил цеплялся за жизнь. Мотоцикл, виляя, мчался по газону и, обогнув угол здания, выехал на шоссе.

 
 

 

How to Fix Windows 10 Update If It Freezes or Becomes Stuck.Solution 1: Check Whether the PC Is Responding

 
Apr 30,  · Windows 10 stuck on black screen with spinning dots may occur in different situations. Three common scenarios are here: 1. Windows Update Stuck on Loading Screen. Some users say that they want to upgrade their Windows OS to the latest Windows 10, but finally, Windows 10 stuck on black loading screen without any process issue happens. 2. May 23,  · Settings > Update & Security > Windows Update > View update history. Referring to update issue，you have these following ways： 1. Windows update troubleshooter Settings > Update & Security > Troubleshoot > Windows Update > Run the troubleshooter. replace.me windows update components Open a command prompt with Administrative Privileges, run the following. Dec 09,  · If the laptop is stuck on the ‘ Just a Moment’ screen, unplug any USB devices, especially a wireless mouse or keyboard. Press and hold the Power Button to perform a Hard Shut Down. Then Start the laptop again, it will now hopefully finish the install. If that does not work, you say you have a Windows 10 installation USB, is this bootable media. Jun 24,  · Reasons for Windows 10 Stuck on Just a Moment The speed of Windows 10 update and installation relies on the hardware specification, available disk space, hard drive read-write speeds, the speed of internet connection, and more. When the Estimated Reading Time: 7 mins.
Aug 25,  · Step 1: Run Windows Update Troubleshooter The first step is the safest way to resolve Windows 10 Update issues. The process will automatically scan for Estimated Reading Time: 8 mins. Mar 25,  · After we have finished all commands, we can restart our computer and try to check whether Windows 10 won’t download updates issue is solved. Increase Free Space of System Drive Sometimes, the problem Windows 10 won’t install or download update may be caused by small capacity of the system drive. Apr 30,  · Windows 10 stuck on black screen with spinning dots may occur in different situations. Three common scenarios are here: 1. Windows Update Stuck on Loading Screen. Some users say that they want to upgrade their Windows OS to the latest Windows 10, but finally, Windows 10 stuck on black loading screen without any process issue happens. 2.
Mar 25,  · After we have finished all commands, we can restart our computer and try to check whether Windows 10 won’t download updates issue is solved. Increase Free Space of System Drive Sometimes, the problem Windows 10 won’t install or download update may be caused by small capacity of the system drive. Apr 30,  · Windows 10 stuck on black screen with spinning dots may occur in different situations. Three common scenarios are here: 1. Windows Update Stuck on Loading Screen. Some users say that they want to upgrade their Windows OS to the latest Windows 10, but finally, Windows 10 stuck on black loading screen without any process issue happens. 2. Aug 25,  · Step 1: Run Windows Update Troubleshooter The first step is the safest way to resolve Windows 10 Update issues. The process will automatically scan for Estimated Reading Time: 8 mins.

But to solve Windows 10 update problems has been a tough task. Windows update is necessary for many computer users because updating new operating system can perfect the old one and overcome some bugs so as to protect computers and data safely.

We just list some factors may lead to Windows 10 update failed. It is obvious that other reasons also can lead to Windows 10 upgrade errors. But no matter what causes lead to Windows 10 not updating problem, you can try to use the following 7 methods to have a try. Windows 10 stuck on loading screen? Top 10 solutions are here to help you out of Windows 10 black screen with loading нажмите чтобы прочитать больше and cursor.

Quick Video Guide:. First of all, a piece of third-party security software can protect your computer against virus attack or other security threats, but it also may lead to some application abnormal running. Thus, if you have installed a piece of third-party security software, you can remove it temporarily and then run Windows Update again. Then we will talk about how to uninstall third-party software simply.

Step 2: Click Programs and Featuresand choose the third-party software needing to be uninstalled, then right-click it and choose Uninstall to continue.

Windows Update is a Microsoft service for the Windows operating system, which automates downloading and installing software updates over the Internet. The service delivers software updates for Windows, as well as the various Microsoft antivirus products, including Windows Defender and Microsoft Security Essentials. Then we will introduce how to check Windows Update Utility.

Step 2: You will see the following popup window. If there’s something wrong and Windows knows what it is then you can find details here.

Thus you need to click Fix issues and Windows Update utility will help to finish updating automatically. Step 3: You can also click the Advanced options to know more information. It is recommended to choose Automatic. Then input services.

Step 2: In the popup window, choose Windows Update and right-click, and адрес choose Properties. Step 3: In the popup window, set the Startup type as Automatic. Then click OK to continue. Step 5: Locate and right-click Cryptographic Service and choose Properties. Then set Startup type as Automatic. Then repeat the process to finish the setting. When all steps have been finished, you can restart computers and check whether Windows 10 update error still occurs.

Now, we will introduce how to use Troubleshooter to fix Window 10 update error. Step 1: Right-click Start menu and choose Control Panel to continue. Step 2: On the upper right corner, switch the View by option to Large icons and choose Troubleshooting. Step 3: Click View all to continue and choose Windows Update. Run it to enter the main interface, and then click Next to continue. Step 5: Wait for this software to detect and fix errors. Then click Close to exit Windows Update Troubleshooter.

If Windows 10 is not updating, you can try to restart Windows Update services. The followings are the detailed operation methods. Step 2: In the popup window, type the following command and press Enter after each command. Wait for each process to finish before continuing to the next one. Thus you had better increase the free space of the system http://replace.me/1447.txt in order to windows 10 stuck on just a moment after update free download Windows There are several ways to increase the capacity of system drive.

We will introduce two ways, which are Disk Clean-up and Extend Partition. Disk Clean-up is very useful to free up disk space and remove some unnecessary files on a computer hard drive, which not only occupy the memory of system hard drive but also slow down our PC. Step 1: Right-click the Start menu of Windows 10 and choose Runand input diskmgmt. Then click the OK or hit Enter to continue. Step 2: Enter the main interface of Disk Management. Then choose the system drive and choose Properties from the context menu.

Step 4: Disk Clean-up will take a few minutes to calculate the free space but the specific time depends on how much files the disk has. Then you can tick the files needing to be deleted. Last, приведенная ссылка OK to continue. Step 5: You can see a popup message Are you sure to want to permanently delete these files and click Delete File s to continue. Then the Disk Clean-up can be completed. In fact, when cleaning up disk, you may find that the capacity of system drive only can be increased a little.

If the size of new operating system is large, thus the capacity of system drive is not enough to install it Windows 10 stuck on just a moment after update free download is an article which introduces the Windows 10 Size. Therefore, applying best partition software to extend partition may be helpful. MiniTool Partition Wizard has been the choice of thousands of users. This high-performance tool helps make the optimal disk space distribution and ensure an ideal hard windows 10 stuck on just a moment after update free download structure.

Buy Now. Step 1: To extend system partitionyou had better use the bootable edition. Step 2: Connect it to your computer and boot from it. Step 3: Choose the system drive. Then choose Extend Partition from left pane or choose Extend from context menu. Step 4: Then open the dropdown list from the Take Free Space from menu and choose any partition or unallocated space on the same drive to take free space.

Meanwhile, you also can drag the sliding handle to decide how much free space you want to take. Then press the OK button to continue.

Step 5: Choose the Apply button on the top of the menu to extend system partition. It can extend partition without data loss. Compared with extending volume by Disk Management, MiniTool Partition Wizard can extend partition even though there is no adjacent unallocated space on the right of the system partition. Windows 10 stuck on just a moment after update free download, MiniTool Partition Wizard is windows 10 stuck on just a moment after update free download convenient to extend partition.

It can take space from the nonadjacent windows 10 stuck on just a moment after update free download space. So in windows 10 stuck on just a moment after update free download to solve this problem, you can run System File Checker to check and repair the corrupted system files.

Step 1: Type Command Prompt in the search box of Windows 10 and right-click it to choose the Run as administrator. However, if none of above methods works, you may need to reinstall Windows And it is easy to operate. Are you still troubled by Windows 10 update error after reading this post? When you extend partition, try to use MiniTool Partition Wizard.

At the same time, remember to back up all files before you want to have a try on any method so as to avoid an accident. If you have any questions when you are using MiniTool Partition Wizard, you can contact us by sending email to [email protected]. Or if you have a nice solution to Windows 10 not upgrading, you can share it in the comment zone.

Download Partition Wizard. Read More. Remove third-party security software. Check Windows update utility manually. Keep all services about Windows update running. Run Windows update troubleshooter. Restart Windows update service by CMD. Increase free space of system drive. Repair corrupted system files. Open Command Prompt as an administrator. Type the command wuauclt.

Go to Windows Update tab and click Check for updates. What to do if my computer is stuck updating? Wait or restart the computer. Free up disk space. Disable all non-Microsoft programs. Turn off Firewall temporarily. Restart Windows update service. Run antivirus. Windows 10 update takes so long to complete because Microsoft is constantly addling larger files and features to them.

Because it so often works. There’s no magic trick to this — it simply clears out your computer’s temporary memory including any stalled files or processes , and lets Windows start again from scratch with everything on the system. If your updates are stuck in the background while you still have access to Windows, you can restart as normal; if they’re stuck before or after the OS loads, you’re going to have to hold down the power button and do a hard reset.

This can cause issues itself, so make sure your updates definitely aren’t progressing at all. Sometimes you’ll just get a message telling you to try the update again at a different time. If you click ‘Advanced options’ and then ‘View your update history’, you can see recently installed updates that were successful, and uninstall some or all of them — again, this can be a handy troubleshooting option. Windows 10 has actually streamlined the update process, so you should be seeing fewer errors.

Microsoft feels your pain: it knows the update process can cause problems every now and again, which is why it’s developed a troubleshooter program specifically for it — search the old Control Panel for “troubleshooting”, then select ‘Fix problems with Windows Update’ from the list on-screen. The link should be available in Windows 7 and 8 too, but if not you can get at it on the web as well.

That said, if you haven’t yet upgraded to Microsoft’s latest and greatest operating system then it’s probably still worth your while , as it’s more than likely to solve your update problems at the same time. Safe Mode is like a restart with extras — only the very basic apps and code that Windows needs to run are loaded into memory, so there’s even less chance of a rogue, damaged file interfering with the update. In Windows 10, hold down the Shift key then choose Power and Restart from the Windows sign-in screen.

On the next screen you see pick Troubleshoot, Advanced Options, Startup Settings and Restart, and you should then see the Safe Mode option appear: try running through the update process again if you can. A quick search online will give you Safe Mode instructions for older versions of Windows. We just list some factors may lead to Windows 10 update failed.

It is obvious that other reasons also can lead to Windows 10 upgrade errors. But no matter what causes lead to Windows 10 not updating problem, you can try to use the following 7 methods to have a try. Windows 10 stuck on loading screen? Top 10 solutions are here to help you out of Windows 10 black screen with loading circle and cursor.

Quick Video Guide:. First of all, a piece of third-party security software can protect your computer against virus attack or other security threats, but it also may lead to some application abnormal running. Thus, if you have installed a piece of third-party security software, you can remove it temporarily and then run Windows Update again. Then we will talk about how to uninstall third-party software simply.

Step 2: Click Programs and Features , and choose the third-party software needing to be uninstalled, then right-click it and choose Uninstall to continue. Windows Update is a Microsoft service for the Windows operating system, which automates downloading and installing software updates over the Internet. The service delivers software updates for Windows, as well as the various Microsoft antivirus products, including Windows Defender and Microsoft Security Essentials. Then we will introduce how to check Windows Update Utility.

Step 2: You will see the following popup window. If there’s something wrong and Windows knows what it is then you can find details here. Thus you need to click Fix issues and Windows Update utility will help to finish updating automatically. Step 3: You can also click the Advanced options to know more information. It is recommended to choose Automatic. Then input services. Step 2: In the popup window, choose Windows Update and right-click, and then choose Properties.

Step 3: In the popup window, set the Startup type as Automatic. Then click OK to continue. Step 5: Locate and right-click Cryptographic Service and choose Properties. Then set Startup type as Automatic. Then repeat the process to finish the setting. When all steps have been finished, you can restart computers and check whether Windows 10 update error still occurs.

Now, we will introduce how to use Troubleshooter to fix Window 10 update error. Step 1: Right-click Start menu and choose Control Panel to continue. Step 2: On the upper right corner, switch the View by option to Large icons and choose Troubleshooting. Step 3: Click View all to continue and choose Windows Update. Run it to enter the main interface, and then click Next to continue.

Step 5: Wait for this software to detect and fix errors. Then click Close to exit Windows Update Troubleshooter. Read the ” Note ” and click on ” Finish ” button to go back to the main interface. Then, click on ” Apply ” to execute this copy operation.

In addition, MiniTool ShadowMaker, free PC backup software, also offers you a feature to clone a hard drive for backup with simple clicks. Just use it to back up your disk data when Windows 10 stuck on spinning dots issue occurs due to bad sectors.

After copying disk, your data on the source disk will be kept well on the destination disk. Then you will not be bothered by the risk of data loss caused by “Windows 10 hangs at loading screen” issue. Of course, “Windows 10 freezing on loading screen” issue may be caused by other reasons. You can also try the following methods to solve this issue. Entering Safe Mode and doing something useful is another easy way to fix this issue.

Here, there are four different operations for different situations after you enter the Safe Mode. You can select a proper operation according to your actual situation.

If you encounter this issue when you are trying to update Nvidia Derivers, you can enter the Safe Mode and make a roll back of the Nvidia drivers. Then try to restart your computer in normal mode. In some cases, “Windows stuck on loading screen” issue is caused by Windows update or other problems. At this time, you can enter the Safe Mode, do nothing and then reboot your computer.

Virus or malware may cause “Windows stuck on loading screen” issue. Why not use a piece of antivirus software to scan your computer in Safe Mode, remove all the virus and malware from your computer, and then try to restart your computer.

It is possible that the installed antivirus software conflicts with the current Windows OS, and then “Windows 10 stuck on spinning dots” issue happens when you want to start your computer.

So, you can uninstall that antivirus software in Safe Mode, and then restart your computer to verify whether it is normal. On condition that this method is unavailable for your case, we have the fourth way to be recommended.

Please read on. In case that there is something wrong with Windows 10 system, you can do system repair to fix it. Since you can’t boot Windows 10 normally, you need to use a Windows 10 installation CD or enter the Safe Mode to open command prompt window and type ” bootrec. If the above four methods can’t fix “Windows 10 freezing on loading screen” issue, you can also do a System Restore which will take your computer back to an earlier point in time. However, you have to make sure that there is a full system backup on your computer, and the system protection is turned on.

Here, you still need to do it in Safe Mode. If this method doesn’t work for you, please try the next method to fix Windows 10 stuck on spinning dots issue.

If your computer has been used for more than three years, you should consider replacing the CMOS battery. There are real cases show that if CMOS battery is powered off for an extended amount of time, “Windows 10 hangs at loading screen” issue may happen when you boot your computer. Under this circumstance, you should cut off the power of your computer, open the computer case, and reinstall the RAM. After that, you can restart your computer to check whether it can boot normally. Of course, you can try this method twice if this issue is not solved after the first try.

If all of the above methods are unavailable to solve “Windows hangs at loading screen” issue, you should try to do a clean reinstallation of Windows Before reinstallation, you can use ” Copy Disk ” function of MiniTool Partition Wizard Bootable Edition to back up all data on the computer, format your computer hard drive and then reinstall Windows 10 to fix Windows 10 stuck on black loading screen.

Found a Windows 10 update is stuck? With so many hardware and software configurations out there, there’s always the chance that some unexpected problem will crop up. Operating system updates can be a real chore, and you might not care for them. But like taxes and car MOTs, they are a necessary evil, essential for a happy and peaceful computing life. They keep you protected by squashing nasty bugs, and your OS running as smoothly as possible. Even with Microsoft trying to make the process as pain-free as possible in recent versions of Windows , getting a Windows 10 update stuck may still happen to you.

We’ve got you covered. We’re going to cover a lot of ground here for several versions of Windows and a variety of ‘stuck’ scenarios, so you may have to tweak some of these steps to suit your situation and software. The first point to make is that interfering with updates that aren’t actually stuck can cause a host of problems, so you want to make sure they really are stuck.

If you’ve got the time, and the patience, we’d recommend waiting a couple of hours, especially with slower machines — go and cut the grass or watch a movie.

Yes No. Sorry this didn’t help. Thanks for your feedback. Hard restarts haven’t worked, I’ve taken out the battery and took the plug out after I had turned it off and pressed the power button a few times just to make sure it was reset, turned it back on, I’ve done this before too and it still gets infinitely stuck on that screen. There are currently no usb devices plugged into it, I just have my windows 10 dvd in the tray. I finally got to the bios screen, I’ve set the boot order to check for dvds and usbs first, but now when I restart it just goes back to the bios screen no matter what I press.

Currently I don’t have the hard drive as an option, so that’s probably why. But does that mean it won’t detect anything aside from the hard drive now? Will also test with usb drive and with re-enabling the hard drive as a boot option and will say what happens. Turn your computer on and off three times. While booting, make sure you turn off the computer when you see the Windows logo. After the third time, Windows 10 will boot into diagnostics mode. Click Advanced options when the recovery screen appears.

You can try booting into the Recovery environment again, then click Advanced options, then click Startup repair. It’s worked before so I know I did it right, heh. Same thing with the USB, used the tool to create it.

Currently I don’t see the windows logo when it starts up. I see the MSI logo, then the screen turns black for a moment, then it switches to the Just a moment Also I was out for a bit and when I came back it had gone to sleep and when I woke it up, the Just a moment You can refer to these two posts to get the bootable media, and then boot your computer from it: 1.

You need to select the target disk after entering the software’s main interface, and then click on ” Surface Test ” feature from the left action pane.

Then, click on ” Start Now ” button to start surface test process. During this process, the bad sectors will be marked as red, and the normal sectors will be marked as green. Click to tweet. If there are bad sectors on the hard disk, you need to shield them. After that, you can restart your computer.

If “Windows 10 stuck on loading screen” problem happens again, the hard drive may be damaged. Under this situation, you should consider replacing the original hard disk. However, you may want to clone the original data on the target hard drive in advance. Step 1: to clone hard drive data, you should select the disk you want to copy and click on ” Copy Disk ” from the left action pane.

On the first pop-out window, you need to select the target disk which you want to use as the alternative disk and press ” Next ” to continue.

Here, you should know that the content on the target disk will be deleted. So, please make sure that there is no important data on it. Step 2: on the second pop-out window, please choose the copy options according to your own needs and click ” Next ” to continue.

Step 3: after that, you will enter a window which tells you how to boot from the destination disk. Read the ” Note ” and click on ” Finish ” button to go back to the main interface. Then, click on ” Apply ” to execute this copy operation. In addition, MiniTool ShadowMaker, free PC backup software, also offers you a feature to clone a hard drive for backup with simple clicks. Just use it to back up your disk data when Windows 10 stuck on spinning dots issue occurs due to bad sectors.

After copying disk, your data on the source disk will be kept well on the destination disk. Then you will not be bothered by the risk of data loss caused by “Windows 10 hangs at loading screen” issue.

Of course, “Windows 10 freezing on loading screen” issue may be caused by other reasons. You can also try the following methods to solve this issue. Entering Safe Mode and doing something useful is another easy way to fix this issue.

Here, there are four different operations for different situations after you enter the Safe Mode. Method C Other update Issue Maybe there was another update stuck before you install this upgrade.

Reset windows update components Open a command prompt with Administrative Privileges, run the following:. Method D Clean Boot You can try to remove any external device connected to PC and make sure you also disconnect any device connected via USB like pen drives, mouse or keyboard, portable hard disk, etc. Once you have successfully removed any USB peripherals, try to update the Windows again and check if the issue has been fixed or not.

Performing a Clean Boot can help you start Windows through a minimal set of drivers and startup programs, which can avoid software conflicts while installing Windows updates. In order to perform a clean boot, you need to do:. Step 2: Then go to the Services tab. Check the Hide All Microsoft Services box. Step 3: Now, click the Disable all button, and click Apply to save the change.

Jun 24,  · Reasons for Windows 10 Stuck on Just a Moment The speed of Windows 10 update and installation relies on the hardware specification, available disk space, hard drive read-write speeds, the speed of internet connection, and more. When the Estimated Reading Time: 7 mins. May 06,  · Hold down the Windows Logo key, and while doing so, press R to open a Run Type replace.me into the Run dialog and press Enter. Locate and right-click on the Windows Update service, and click on Properties. Set the service’s Startup type to Automatic, if the service is stopped, click on Start to start it, click on Apply and then click on OK. Dec 09,  · If the laptop is stuck on the ‘ Just a Moment’ screen, unplug any USB devices, especially a wireless mouse or keyboard. Press and hold the Power Button to perform a Hard Shut Down. Then Start the laptop again, it will now hopefully finish the install. If that does not work, you say you have a Windows 10 installation USB, is this bootable media. Apr 30,  · Windows 10 stuck on black screen with spinning dots may occur in different situations. Three common scenarios are here: 1. Windows Update Stuck on Loading Screen. Some users say that they want to upgrade their Windows OS to the latest Windows 10, but finally, Windows 10 stuck on black loading screen without any process issue happens. 2.

Found a Windows 10 update is stuck? With so many hardware and software configurations out there, there’s always the chance that some unexpected problem will crop up. Operating system updates can be a real chore, and you might not care for them. But like taxes and car MOTs, they are a necessary evil, essential for a happy and peaceful computing life. They keep you protected by squashing nasty bugs, and your OS running as smoothly as possible.

Even with Microsoft trying to make the process as pain-free as possible in recent versions of Windows , getting a Windows 10 update stuck may still happen to you.

We’ve got you covered. We’re going to cover a lot of ground here for several versions of Windows and a variety of ‘stuck’ scenarios, so you may have to tweak some of these steps to suit your situation and software.

The first point to make is that interfering with updates that aren’t actually stuck can cause a host of problems, so you want to make sure they really are stuck. If you’ve got the time, and the patience, we’d recommend waiting a couple of hours, especially with slower machines — go and cut the grass or watch a movie.

It may seem extreme, but you don’t want to start meddling with these fundamental processes unless you really have to. Because it so often works. There’s no magic trick to this — it simply clears out your computer’s temporary memory including any stalled files or processes , and lets Windows start again from scratch with everything on the system.

If your updates are stuck in the background while you still have access to Windows, you can restart as normal; if they’re stuck before or after the OS loads, you’re going to have to hold down the power button and do a hard reset. This can cause issues itself, so make sure your updates definitely aren’t progressing at all. Sometimes you’ll just get a message telling you to try the update again at a different time.

If you click ‘Advanced options’ and then ‘View your update history’, you can see recently installed updates that were successful, and uninstall some or all of them — again, this can be a handy troubleshooting option. Windows 10 has actually streamlined the update process, so you should be seeing fewer errors. Microsoft feels your pain: it knows the update process can cause problems every now and again, which is why it’s developed a troubleshooter program specifically for it — search the old Control Panel for “troubleshooting”, then select ‘Fix problems with Windows Update’ from the list on-screen.

The link should be available in Windows 7 and 8 too, but if not you can get at it on the web as well. That said, if you haven’t yet upgraded to Microsoft’s latest and greatest operating system then it’s probably still worth your while , as it’s more than likely to solve your update problems at the same time. Safe Mode is like a restart with extras — only the very basic apps and code that Windows needs to run are loaded into memory, so there’s even less chance of a rogue, damaged file interfering with the update.

In Windows 10, hold down the Shift key then choose Power and Restart from the Windows sign-in screen. On the next screen you see pick Troubleshoot, Advanced Options, Startup Settings and Restart, and you should then see the Safe Mode option appear: try running through the update process again if you can.

A quick search online will give you Safe Mode instructions for older versions of Windows. System Restore has been helpful for solving Windows problems for many a year now, but it happens to be quite well hidden in Windows Go through the wizard, then choose ‘Show more restore points’ to see all your available options.

Pick a time and date, then complete the wizard to go back to how Windows was configured at that point and hopefully solve your update issues at the same time. The process doesn’t affect your personal files or programs, but it may not be available to you depending on how Windows was originally set up.

If Windows’ own troubleshooter doesn’t work see step 4 then you can try and carry out the same process yourself manually: stopping the Windows Update service, deleting the temporary files it’s created, then starting Windows Update again. It’s a little more involved, but it’s not difficult to do.

First, boot up into Safe Mode see step 5 , then access to the command prompt, the most basic of Windows interfaces: right-click on the Start menu, choose Command Prompt Admin , and a text box should appear. Type “net stop wuauserv” and hit Enter, then follow that with “net stop bits” and hit Enter again. You’re not going to break anything by doing this — these are just temporary files Windows creates so it knows where it’s up to, and Windows Update will create them again from scratch.

With that done, go back to your command prompt window and type “net start wuauserv” Enter then “net start bits” Enter to get Windows Update and its related background services up and running again; hopefully this trick should be enough to kick-start the update that was previously stuck. One of the more obscure reasons why a Windows update might not be installing is because a virus or some kind of spyware is blocking it: malicious apps like these can often be squashed by Windows security updates, which is why they try and stop the latest patches from being installed on your machine.

Try running a full and thorough virus scan using whatever security software you have installed you do have some installed, right? If you think your antivirus tool has also been compromised you can download some on-demand scanners, like this one from Microsoft or this one from Dr. Restoring key Windows files and OS options is a lot easier than it used to be, and ‘resetting’ Windows 10 basically means putting all the system files back to their factory state without touching your personal files along the way although you can choose to wipe your drive completely if you want.

Windows 8 offers both ‘refresh’ and ‘reset’ options , while on Windows 7 the reset option will typically have been provided by the PC’s manufacturer. North America. Please deactivate your ad blocker in order to see our subscription offer. See more how-to articles.

 
 

Windows 10 stuck on Just a Moment, can’t do anything else – Microsoft Community.How to Fix Windows 10 Update If It Freezes or Becomes Stuck

 
 
Aug 25,  · Step 1: Run Windows Update Troubleshooter The first step is the safest way to resolve Windows 10 Update issues. The process will automatically scan for Estimated Reading Time: 8 mins. Mar 25,  · After we have finished all commands, we can restart our computer and try to check whether Windows 10 won’t download updates issue is solved. Increase Free Space of System Drive Sometimes, the problem Windows 10 won’t install or download update may be caused by small capacity of the system drive. Dec 09,  · If the laptop is stuck on the ‘ Just a Moment’ screen, unplug any USB devices, especially a wireless mouse or keyboard. Press and hold the Power Button to perform a Hard Shut Down. Then Start the laptop again, it will now hopefully finish the install. If that does not work, you say you have a Windows 10 installation USB, is this bootable media. Jun 24,  · Reasons for Windows 10 Stuck on Just a Moment The speed of Windows 10 update and installation relies on the hardware specification, available disk space, hard drive read-write speeds, the speed of internet connection, and more. When the Estimated Reading Time: 7 mins. May 06,  · Hold down the Windows Logo key, and while doing so, press R to open a Run Type replace.me into the Run dialog and press Enter. Locate and right-click on the Windows Update service, and click on Properties. Set the service’s Startup type to Automatic, if the service is stopped, click on Start to start it, click on Apply and then click on OK.

The most important part is to fix Window 10 update stuck with the given solutions below. Go for it. However, you still need to upgrade drivers, service packs on Windows 10 with Windows Update. Thus, there are 3 situations you will receive this error. During the downloading and installing process, you may find it suddenly stuck with error code, such as, 0, 3, 35, 48, 81, 99, etc.

And this situation may windows 10 stuck on just a moment after update free download for hours. The Windows Update http://replace.me/621.txt automatically download the latest available updates for your computer.

But you may find Windows Update stuck downloading updates and get stuck at some point. After the Windows Update downloads updates, Windows will install the ones it can, and save others to install when you windows 10 stuck on just a moment after update free download your computer. By default, if you use a SSD on the computer, the update should take between 10 and 30 minutes.

If your computer is instlled on HDD, the update process will take longer, may be 90 minitues, or 24 hours. If the windows 10 stuck on just a moment after update free download takes too long, your update may be stuck. Don’t wait forever and take some measures to fix the update issue. Why is Windows Update stuck at 99 or 0?

There are many reasons, such читать полностью, outdate, corrupted, or missing drivers, Windows 7 pending update, hardware issues etc. To fix the upgrade stuck issue, you can try the built-in troubleshoot tool or other methods in the приведенная ссылка. Just use the one suitable for you.

Besides, you still need to create a system backup after this issue fixed. The missing drivers may be one of the reasons to Windows 10 upgrade stuck. Before upgrading, you need to check and reinstall the missing drivers with the following steps:. Find the missing drivers. You can expand the categories and see if there is a yellow mark. In general, an exclamation mark will come with it.

You need to update using the steps below:. Type windows update in the search box and select it. Click Check for updates under Windows Update. Just wait until you see the available updates and update it. This windows 10 stuck on just a moment after update free download is borrowed from Microsoft.

You can try to fix “Windows 10 upgrade sruck at 99” using the following steps:. In this folder, you still can see a regular Windows installation package. Install Windows 10 creators update microsoft office home and 2007 with key free as normal. Type the following text and save as fix. Right-click the file and run as administrator.

Restart your computer and try Windows Update again. Media creation tool will create a setup file for Windows 10 and assist you reinstalling Windows Details to upgrade Windows:.

Download Windows 10 Media Creation tool on your system and install it. Follow instructions on this tool until you see Windows 10 setup screen. In this window, you should tick Upgrade this PC now and then click Next. After finishing the downloading, click Accept and make sure Keep personal files and application option is selected. If not, you can click Change what to keep and change the settings.

Click Install to start Windows 10 update. Windows 10 includes a built-in troubleshooter, which can stop the Windows Update Services, clear Update cache rename the SoftwareDistribution folder to SoftwareDistribution.

With the help of it, you can fix Windows 10 update stuck at 99 or 0. Type troubleshooting in the search box and select it from the list. Click Fix problems with Windows Update. Click Advanced and tick Apply repairs automatically. Click Next to start the repair process. Boot into safe mode.

You can hold down the Shift key as you click Power and Restart in Windows Empty SoftwareDistribution folder. Note: There is nothing important here. And Windows Update will recreate what it needs at the next time you run it.

Restart Windows Update Service. You can type the following commands in the command prompt and press Enter after each one. Restart your computer and run Windows Update again. In addition, you still can try to restore from a system restore point or directly reinstall Windows. Try above methods and find the one works for you.

To avoid meeting the same problem again, you still need to create a system image with free backup software like AOMEI Backupper Standard. It contains the operating system and all files related to your system. Thus, no matter what happens, you still can recover your computer. When the update issue occurs again, you can restore system image from external hard drive and then all things become normal. Click Backup and System Backup. To create a disk backupjust click Disk Backup as shown in the following picture.

Select a path for your backup. If you want to save it to external hard drive, you need to plug it into the computer before you start to create system image backup.

Set up settings if needed. Click Options, Schedule, Scheme in the bottom and select the settings you like. You can compress the backup image if you want to backup large files. But this feature is only available on the paid version. Reading here, you may already fix the Windows 10 upgrade stuck issue. Please remember to create a system image or disk image for your computer.

Only in this way, your computer can always be safe and sound. And you files can keep intact. Content of this article: Overview of Windows 10 stuck on just a moment after update free download 10 upgrade stuck Is Windows update really stuck?

How to fix Windows 10 upgrade stuck effectively? What to do after Windows 10 Upgrade stuck issue fixed? Situation 1: Windows 10 Upgrade Assistant stuck During the downloading and installing process, you may find it suddenly stuck with error code, such as, windows 10 stuck on just a moment after update free download, 3, 35, 48, 81, 99, etc.

Situation 2: Windows 10 update progress bar is stuck The Windows Update will automatically download the latest available updates for your computer. Situation 3: Windows 10 Update stuck in blue screen After the Windows Update downloads updates, Windows will install the ones it can, and save others to install when you restart your computer. Before upgrading, you need to check and reinstall the missing drivers with the following steps: 1. You need to update using the steps below: 1.

Try to upgrade to Windows 10 and see if it works. You can try to fix “Windows 10 upgrade sruck at 99” using the following steps: 1.

Restart your computer. Open notepad. Details to upgrade Windows: 1. Detailed steps to fix upgrade issues: 1. Then, backup system after fixing Windows 10 upgrade stuck issue, using the following steps: 1. Free Backup Software. Still Need Help? Have your problem been solved? If not, please input query in the search box below.

Thus, when you are bothered by Windows 10 stuck on Just a moment issue, you can clean install Windows 10 to have a try.

In the following guide, we will walk through the steps to clean install Windows 10 including these three parts:. The clean installation process will delete everything from your computer hard drive. This software is specially designed to recover data from various types of data storage devices, including computer hard drives, USB flash drives, memory cards, SD cards, and more.

These data can be both deleted and existing items. You need to get one of these editions from the MiniTool official store according to your actual situation.

If you are a personal user, the Personal Deluxe Edition can fully meet your need. Get a normal working computer to obtain this software and then refer to the following guide to build a bootable medium and start the unbootable machine from it:.

Choose the target partition you need to restore data from and click on the Scan button to start the scanning process. When the scanning process ends, you can see the scan results which are classified by path.

You can open each path to find the files you want to restore. Usually, there are numerous files on your computer hard drive and it is usually difficult to find out the needed ones quickly. In this situation, you can try the Type and Find features of this software to locate your needed files easily.

Additionally, with the Bootable Edition, you can preview the image files and text files which are no larger than 20MB. That is to say, when you are not sure whether it is the image or text file you need to restore, you can use the Preview feature to identify. Connect an external drive which has enough space to store your needed files to your computer and then check the files you want to restore.

After that, press the Save button to choose the inserted external drive to keep the selected items. Now, your needed data is saved to a safe place.

Next, you need to create a USB bootable medium. Go to the next part the get the steps. Click to tweet. Go to the Windows 10 download page on the web browser. Press the Accept button to agree to the Applicable notices and license terms. In the following interface, you can select language, architecture, and edition you want to use. Cellular network is not stable. This will take a while. Method A Check if there is a lack of free space situation in your C drive. If so, clean up your C drive, make sure it has at least 8GB of space.

Method B Check your driver in device manager to see if anything not working. Update all your driver. Method C Other update Issue Maybe there was another update stuck before you install this upgrade. Reset windows update components Open a command prompt with Administrative Privileges, run the following:.

Method D Clean Boot You can try to remove any external device connected to PC and make sure you also disconnect any device connected via USB like pen drives, mouse or keyboard, portable hard disk, etc. Once you have successfully removed any USB peripherals, try to update the Windows again and check if the issue has been fixed or not.

Performing a Clean Boot can help you start Windows through a minimal set of drivers and startup programs, which can avoid software conflicts while installing Windows updates.

In order to perform a clean boot, you need to do:. Thus, if you have installed a piece of third-party security software, you can remove it temporarily and then run Windows Update again. Then we will talk about how to uninstall third-party software simply. Step 2: Click Programs and Features , and choose the third-party software needing to be uninstalled, then right-click it and choose Uninstall to continue.

Windows Update is a Microsoft service for the Windows operating system, which automates downloading and installing software updates over the Internet. The service delivers software updates for Windows, as well as the various Microsoft antivirus products, including Windows Defender and Microsoft Security Essentials. Then we will introduce how to check Windows Update Utility. Step 2: You will see the following popup window. If there’s something wrong and Windows knows what it is then you can find details here.

Thus you need to click Fix issues and Windows Update utility will help to finish updating automatically. Step 3: You can also click the Advanced options to know more information. It is recommended to choose Automatic. Then input services. Step 2: In the popup window, choose Windows Update and right-click, and then choose Properties. Step 3: In the popup window, set the Startup type as Automatic.

Then click OK to continue. Step 5: Locate and right-click Cryptographic Service and choose Properties. Then set Startup type as Automatic. Then repeat the process to finish the setting.

When all steps have been finished, you can restart computers and check whether Windows 10 update error still occurs. Now, we will introduce how to use Troubleshooter to fix Window 10 update error.

Step 1: Right-click Start menu and choose Control Panel to continue. Step 2: On the upper right corner, switch the View by option to Large icons and choose Troubleshooting.

Step 3: Click View all to continue and choose Windows Update. Run it to enter the main interface, and then click Next to continue. Step 5: Wait for this software to detect and fix errors. Then click Close to exit Windows Update Troubleshooter. If Windows 10 is not updating, you can try to restart Windows Update services. The followings are the detailed operation methods.

Step 2: In the popup window, type the following command and press Enter after each command. Wait for each process to finish before continuing to the next one. Thus you had better increase the free space of the system drive in order to install Windows There are several ways to increase the capacity of system drive. We will introduce two ways, which are Disk Clean-up and Extend Partition.

May 23,  · Settings > Update & Security > Windows Update > View update history. Referring to update issue，you have these following ways： 1. Windows update troubleshooter Settings > Update & Security > Troubleshoot > Windows Update > Run the troubleshooter. replace.me windows update components Open a command prompt with Administrative Privileges, run the following. May 06,  · Hold down the Windows Logo key, and while doing so, press R to open a Run Type replace.me into the Run dialog and press Enter. Locate and right-click on the Windows Update service, and click on Properties. Set the service’s Startup type to Automatic, if the service is stopped, click on Start to start it, click on Apply and then click on OK. Mar 25,  · After we have finished all commands, we can restart our computer and try to check whether Windows 10 won’t download updates issue is solved. Increase Free Space of System Drive Sometimes, the problem Windows 10 won’t install or download update may be caused by small capacity of the system drive.

Windows 10 is the latest Windows Operating System OS and it owns many great features which are available only on Windows Many users choose to update their Windows OS to this version to enjoy its charming features.

However, no Windows OS is perfect. Windows 10 is not an exception. Here, it is said that many Windows 10 users have encountered this issue: ” Windows 10 stuck on loading screen “. What is the truth? When you search this issue online, you will discover that quite a lot of Windows 10 users post this issue on different forums to seek an available solution. Apparently, this is a very common issue. And when it appears, you will see the computer screen displays Windows 10 black screen with loading circle and cursor see the following picture.

Don’t worry if Windows stuck on welcome screen! Here, you can find 7 effective solutions to solve this issue. Under what circumstance can this issue be triggered? You can read the next section to get the answer. Windows 10 stuck on black screen with spinning dots may occur in different situations. Three common scenarios are here:. Windows Update Stuck on Loading Screen.

Some users say that they want to upgrade their Windows OS to the latest Windows 10, but finally, Windows 10 stuck on black loading screen without any process issue happens. Windows 10 Stuck on Spinning Dots on Startup A lot of users claim that they are unable to turn on Windows 10 normally because it has been getting stuck on the black screen with white spinning dots at the bottom just before the login screen.

Windows 10 Hangs at Loading Screen When Upgrading Nvidia Drivers A few Windows 10 users post on the internet that when they try to update their Nvidia drivers, the computer screen becomes black suddenly. After doing a hard reset of the system, Windows 10 black screen spinning dots issue occurs. Method C Other update Issue Maybe there was another update stuck before you install this upgrade.

Reset windows update components Open a command prompt with Administrative Privileges, run the following:. Method D Clean Boot You can try to remove any external device connected to PC and make sure you also disconnect any device connected via USB like pen drives, mouse or keyboard, portable hard disk, etc. Once you have successfully removed any USB peripherals, try to update the Windows again and check if the issue has been fixed or not.

Performing a Clean Boot can help you start Windows through a minimal set of drivers and startup programs, which can avoid software conflicts while installing Windows updates. In order to perform a clean boot, you need to do:.

Step 2: Then go to the Services tab. Your email address will not be published. Save my name, email, and website in this browser for the next time I comment. Disclaimer: Some pages on this site may include an affiliate link. This does not effect our editorial in any way.

Should I upgrade to Windows 10? Disable the VPN if applicable and attempt to reinstall. Otherwise, try updating again when your internet connection is stable and reliable. Scenario 2: There is a lack of free space in the System Reserved partition. Undoing changes. The PC failed to update for uncategorized or unknown issues. Any reasons not listed in specific error categories will produce one of these generic error messages.

Review the update history to find the failed update and specific error code that triggered the problem. Resolve the issue, then try updating again. November 21, at pm. This does not help. My problem is that as soon as I switch on my computer, everything is blocked by the Windows 10 update configuration. Even pressing F8 immediately does not work.

None of the advice you give works because it is assumed that the configuration does not start until Windows is up and running. Pick a time and date, then complete the wizard to go back to how Windows was configured at that point and hopefully solve your update issues at the same time. The process doesn’t affect your personal files or programs, but it may not be available to you depending on how Windows was originally set up.

If Windows’ own troubleshooter doesn’t work see step 4 then you can try and carry out the same process yourself manually: stopping the Windows Update service, deleting the temporary files it’s created, then starting Windows Update again. It’s a little more involved, but it’s not difficult to do. First, boot up into Safe Mode see step 5 , then access to the command prompt, the most basic of Windows interfaces: right-click on the Start menu, choose Command Prompt Admin , and a text box should appear.

Type “net stop wuauserv” and hit Enter, then follow that with “net stop bits” and hit Enter again. You’re not going to break anything by doing this — these are just temporary files Windows creates so it knows where it’s up to, and Windows Update will create them again from scratch. With that done, go back to your command prompt window and type “net start wuauserv” Enter then “net start bits” Enter to get Windows Update and its related background services up and running again; hopefully this trick should be enough to kick-start the update that was previously stuck.

You should first check whether your computer is still working. To do this job, you can go to check if the machine is making any noise.

It is a clear sign of whether the processor is still at work. Of course, there is the other sigh: a flickering light. When these two signs show that the processor is still at work, do not tinker with that process in progress.

We have mentioned above: the process speed is possible decided by the internet connect condition, free disk space on your computer, etc. Wait and see. If your computer has fallen into silent and stuck on the seemingly infinite loop: Just a moment , you can consider doing these things:.

After that, reconnect the USB devices to your PC and then check whether the computer can run normally. If yes, you can re-establish the internet connectivity to see whether the update or installation process can run successfully.

When your computer is having performance and other issues, the most effective way to get rid of the issues is to perform a clean installation. This way will remove everything from the hard drive on your machine and start from scratch. Thus, when you are bothered by Windows 10 stuck on Just a moment issue, you can clean install Windows 10 to have a try.

In the following guide, we will walk through the steps to clean install Windows 10 including these three parts:.